Tech

DIRECTIONAL ROCKER

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and slight

camber between the bindings. The rockered tip gives the nose added float and improves

maneuverability while the camber underfoot gives you added edge hold and response.

A slightly rockered tail maintains the power and stability of a traditional board but helps

keep the tail catch-free initiating turns and landing switch.

“My experience is that most falls in freeriding start from the nose of the board – you either

go over the bars in powder, the nose gets caught under a weird crust and tosses you,

or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker

eliminates most of these falls. - Jeremy Jones

CAMROCK

The Mountain Twin features CAMROCK – a unique rocker/camber flex pattern defined by

evenly balanced tip and tail rocker and slight camber between the bindings. CAMROCK

improves freestyle finesse by keeping your tips playful while maintaining the power and

pop of camber underfoot.

MELLOW MAGNE-TRACTION

Like a serrated knife slicing into the snow, Magne-Traction improves your edge grip

by adding multiple contact points along the running length of your board. “Magne-Traction

is a key ingredient for rockered board designs. Adding rocker to your board makes

it glide more smoothly, but it makes it harder to really lock into your turns and hold a solid

edge. Magne-Traction is crucial to offset the drift typical of rocker flex patterns.” - Jeremy

Jones

STRONGER EDGES

We added 35% more steel than a typical edge, what this achieves is a 250% increase

in impact resistance compared to other edges offered on the market today.

ALU PROTECT

State of the art strength aluminum tip protectors. Elastomer is bonded to the aluminum to

absorb vibrations.

BLUNT NOSE

“How a board glides in powder, crust, corn, or any snow condition more then an inch deep

is dictated by its front contact point and just past it. Next time you are in soft snow watch

how much snow comes over the corner of the nose near the contact point. The billowing

snow means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer board tip without the added

length or swing weight.” - Jeremy Jones

FSC WOOD CORE

The FSC wood cores come from forests that are managed to meet the social, economic

and ecological needs of present and future generations.

CARBON STRINGERS

Carbon stringers are added to select models to improve pop and torsional stiffness and

increase the longevity of the flex profile. This lightweight layer helps the board perform the

same on day 100 as it did on day one - precise and playful.

SINTERED BASE

Fastest natural base material available. Durable, absorbs wax faster and retains wax

longer. Our sintered base added with carbon nano particles as well as additives, creates a

better glide. This base is specially developed by Nidecker, and is very resistant to impact.

FULL WOOD CORE

Full poplar and beech core gives the board more solid snap.

WOOD TOPSHEET

The Wood Topsheet on the Flagship dampens the ride for chatter-free performance. The

natural material also eliminates some plastic and lacquer which cuts down on waste and

weight.

FILM TOPSHEET

A thin piece of film replaces the traditional plastic topsheet. This eliminates plastic and

reduces the weight of the board.

FLIP FLOP BASE

By flip flopping the base graphic colors, P-Tex waste is drastically reduced by increasing

the material yield.

RECYCLED BASE

P-Tex scraps are recycled into new bases.

TRIAX FIBERGLASS

All Jones Snowboards include TRIAX Fiberglass, utilizing dual density fibers to strengthen

high impact zones without adding weight or changing the overall flex of our boards.

STONE GROUND FINISH

All boards come with a Stone Ground Finish.